Ezletter Table Size 2000X3000 Woodworking CNC Router Routing Machine From Professiona Manufacturer in China

1.INTRODUCTION of EZ CNC ROUTER MW 2030-ATC

(1). Overview

EZLETTER CNC ROUTER-MW SERIES 
Ezletter CNC Router MW Series is a machine combine gear rack driving and the lastest Hybird Servo Technology. Comparing with some common stepping servo system, it won't lose the steps but will ensure the accurate location of motor. At the meanwhile, the cutting speed will be improved 30% and vibration of motor will be decreased apparently. MW series adopt self-innovated EZLETTER controller system with gantry axis function, and U-disk, and network DNC can connect the machine.  Generally, it is a professional, satisfactory, high performance-cost CNC Router.


(2). Driving System
EZ MW Series used dual servo motor working in the X direction, due to this equipment, motivation and efficiency will be improved. Due to the servo motor would keep balance when the machine is working, so we are sure that the X axis and Y axis will maintain verticality. The Z axis was made of Ballscrew for high precision. By the sides of Z axis, we used two ball bearings to support to the ballscrew. Having run some test, we can make a promise that the bearings must be kept parallel to the linear guides.

(3). Helical Rack and pinion
EZ MW Series adopts Taiwan Yintai precision rack, helical gear has the characteristics of high engagement and rigidity, which is faster than the traditional straight guides , the noise is small. The mixed servo drive system is adopted to reduce the vibration and can show high quality.

HSD Spindle
Power: 380V/4.5kW
Spindle Speed: 18000rpm
Air cooled
Advantage:
1. Adopting high speed chunk and nut with working stability, high speed.
2. Passing strict dynamic balance and satisfy the requirements of high speed

(4). EZLETTER Controller
EZLETTER INTERNATIONAL LIMITED developed EZletter CNC Controller System with its own intellectual property right. EZLETTER CNC CONTROLLER is a double CPU control system. All the functions are integrated in the graphical keypad. EZ system support reliable protection of high precision, high stability, high quality for our CNC Routers. We could create some perfect machine with this system.
EZLETTER CONTROLLER are designed for all kinds of machines with additional benefits:
USB,DNC,network DNC,2G hard drive integration
Multi home and auto surface
G Code inspection before machining
Max Depth, speed and rate Protection
9 layers backups and recovery system, one key return to factory settings
High strength casting aluminum shell with good EMC
Apporximate restart
Collision Avoidance system for ATC
Forward looking function
VFD screen  High speed double-pulse output  Dry running mode, preview tool path
Gantry axis synchronization

(5). Linear Automatic Tools changer
Normally, MW Series choose linear automatic tool changer and it can contain six kinds of knife. It can change the knife automatically when it receive orders, convenient and quick, even focus in some complicate situations. The ATC would save much time in tools changing. Then, we add dust cap on the equipment, dust will be isolated to the knife, and the durability of knife will be expanded. Considering some situation of tools collision, this equipment was installed a reliable air collision avoidance system.

(6). Auto Calibrate Tool Sensor
Auto calibrate tool sensor, it can write all tool parameters into the system through automatically calibrate and save much time comparing with traditional manual calibration. It could make knife be precise of 0,01 mm.


(7). Vacuum table 
Vacuum system can materials on the table surface, comparing to the traditional manual clamping, it will improve production efficiency. The material is adsorbed on the operation table, the middle of the material will not appear shifting. At the meanwhile, each partition can be a separate control, the seal was made from special materials with waterproof and oil Features.  

(8). Mist System
There is a mist system in MW Series, we can spray oil or air through adjusting valve, this is a great way to lubricate our knives and expand Durability.

(9). Software
MW Series can work through some software which will output G code, for example : Wentai engraving software, Jingdiao engraving software, Type3, ArtCAM, AlphaCAM, AutoCAD, Cimatron, MasterCAM, Enrouter. According to the customers requirement, we also can support V-Carve Pro software service.


2. SPECIFICATION
 

3. PERFECT SAMPLES




4. Certifications

    CE certification 

 

5. COMPANY EXHIBITION GLANCE

We have rich experience in machine manufacturing, exporting for nearly 15 years.
We took actively part in all the relevant well-known Exhibitions and EXPO. held around the World since foundation of 2006.
 EZLetter have won a large number of Honour Certificate in the aspects of Technology Creation(Pls. see the attached pics).
Here show you a few pictures and videos of showing on exhibitions FYR:

 

EZLETTER on Dubai Show 2020  https://youtu.be/UXIwuHN-1ns

EZLETTER Machines OverView     https://youtu.be/B8hkd1tMq38

6. Technician Support and service: 

(1): Ezletter can send technician to the customer's country to provide the training if customer required.
(2): Customer will help Ezletter to solve the visa (available) and provide round flight tickets and Hotel and food while he stay in customer's country.  
(3): The whole machine will be warranty one year.
We offer a 12 months warranty carefully, solve all customer's problem reasonably and justly.

(4): On-line Support Service

24 hours telephone line is available for any question.

Experienced service technician team is available.

Support in hard work solution.

 

 

7. Packing & Delivery

With more than 15 years exporting experience, we are so skilled for loading containers and packing the machines in container for safety.