Full Enclosed Safety High Speed Ezcnc 3000W 4kw 5~8kw Fiberlaser Cutting Engraving Machine for Metal Cutting and Engraving

1. Brief Introduction of EZCNC Fiberlaser  APC Series

EZLETTER Exchange Table Fiber Laser is adopted the Sweidish Rack and Opinion, Japan YASKAWA doube servo drivers, Germany Alfa reducer. The precision will be great. The efficiency of auto exchangeable is high, the speed is fast. The running speed is 100m/min without loading and the acceleration could reach 1.2G. There is IPG high power laser with the machine. It is a perfect product in metal cutting industry.





2. Specification

 


3. Fiberlaser Cutting Parameters Referrence List



 4. Detailed Introduction



Introduction of mechanical structure
1.Gantry structure, the platform is stationary, and the Gantry frame is moved.
2.The frame is welded by rectangular tube (250X100X10mm) and finishing after stress released treatment.
3.Using ballscrews and linear guider from Taiwan PMI for all X, Y, Z axis
4.Dual X axis using dual ballscrew with drive nut.
5. Using R+W coupling direct connection technology from Germany connect servo motor and ballscrew, with this coupling, the rigidity and positioning accuracy will be very good.
6. Z axis ballscrew adopts Taiwan double support seat, ball screw Z axis on both sides using a set of back-to-back angular contact thrust ball bearing support.
7. YASKAWA servo system from Japan
8. Adopts the flexible protective cover made of imported materials. It protects the ballscrew and guider rail from the chip or damage.

Electrical parts instruction
The other parts in electrical case are YASKAWA ,ABB ,FINDER ,WAGO,SUNX,LAPP etc famous brand.

Controller system
CypCut Laser cutting system, it can read, design, output and cutting, the software can do all the process from design to cutting. It provides many laser cutting parameters, flexible layout and tool path editing capabilities. It has many functions such as leading in/out, bridging, edge, spot compensation and curve smoothing, segmentation, merging, and automatically distinguish between inside and outside module. provided with the speed of PWM real-time power regulating, progressive perforation hole explosion special process.


Auto Tracking system
1 Sampling rate is 1000 times/second.
2. the fastest following speed can reach 500 mm / sec.
3. the precision of static detection is 0.001 millimeter, and the dynamic response accuracy is 0.02 millimeter..
4. support network communication, U disk online upgrade..
5. support the collision plate alarm, plate missing alarm, effectively prevent the accidental collision of the laser head.
6. Support for edge detection and automatic finding the edge to cut, support the leapfrog lift, segmented perforation, lifting height of any set.      
7. one - key calibration process is fast and easy to operate.
8. When the length of the signal transmission line is up to 100, the signal is not attenuated and the anti-interference ability is strong.

Automatic conversion gas system

The automatic transmission system of high pressure gas is used. When customers need to switch between oxygen, nitrogen or air, they only need to gently click the mouse in the operation system, NO need to change it by manual.

Platform lifting system
There are 3-5 steel rolls that can be lifted automatically on the table. When need to put the material, the rolls is raised, after the material is put on the rolls, the rolls will be put down.

Cutting Head
WSX cutting head made in China


Fiber laser unit
GW, Laser Power (3~8kw) according to our customers' requirements.

Industrial cooling system
Precision stainless steel inner industry water cooler

5. Application and Perfect Samples

Applied materials and Industry:
 

Fiber cutting head (Metal Material):

Mainly used for cutting carbon steel, silicon steel, stainless steel, aluminum alloy, titanium alloy, galvanized steel sheet, pickling board, aluminum zinc plate, copper and  many kinds of metal materials cutting and so on. 

Fiber cutting head (Metal Industries):

Applied in sheet metal processing, aviation, spaceflight, electronics, electrical appliances, subway parts, automobile, machinery, precision components, ships, metallurgical equipment, elevator, household appliances, gifts and crafts, tool processing, adornment, advertising, metal foreign processing various manufacturing processing industries.    

6. Considerations for your referrence

Let me guess what you concerned before sending a inquiry
1. Why do you have to choose our machine?
GuazngZhou EZLETTER Co., Ltd has 15 years in advertisement industry, we always pursuit the quality, precision and customers satisfaction.

2. I know nothing about the machine. How could I choose a suitable machine?
 First of all, thanks a lot for learning about our machines.
You are welcome to send us an inquiry with the following key information so that we could provide you most accurate proposal:
(1). What kinds of metal you have?
(2). What's the thickness and size of your incoming material?
(3). Any special request on the cutting?

3. After I got your inquiry, You will get:
(1). Full proposal for advised machine with price
(2). Relevant machine operating videos
(3). Free sample

If materials will be special, you can send us your materials by express and drawing by email; After sample making, we will send back videos by email and materials by express if necessary to you.If normal material we have, you can send us your drawing by email then we could do samples with the material or similar materials then send you the videos